Mouse acceleration, explained
What acceleration does to your aim, what it costs, and how to try it in CS2 without wrecking the aim you already have.
For years the standard advice was simple: turn mouse acceleration off. That advice was about the uncontrolled acceleration built into operating systems. Acceleration you set up deliberately is a different thing, and some players aim better with it. This guide explains what it does so you can decide whether it is worth trying.
What acceleration is
Without acceleration, your sensitivity is one fixed number. Move the mouse 10 cm and you turn the same amount whether you moved slowly or quickly.
With acceleration, your sensitivity depends on how fast your hand is moving. Slow movements use a low sensitivity. Fast movements use a higher one.
What you gain
The appeal is getting two sensitivities in one. When you make a small, slow correction onto a head, you are on a low sensitivity and the crosshair is easy to control. When you whip round to check behind you, you are on a higher one and the turn takes less arm and less mousepad.
Players who like a low sensitivity for aiming but keep running out of pad on big turns are the ones most likely to benefit.
What it costs
With a fixed sensitivity, your hand learns one rule: this distance on the pad is that distance on the screen. Acceleration replaces it with a rule that also depends on speed. The same 10 cm swipe now turns you a different amount depending on how fast you made it.
You can learn that rule. It takes longer, and it is less forgiving when you are tense, because nerves change how fast you move. A badly chosen curve is worse than no curve.
Acceleration and CS2
CS2 has no acceleration setting of its own. It reads your mouse directly, so the “Enhance pointer precision” option in Windows does not affect your aim in game.
Players who use acceleration in CS2 set it up outside the game, with a driver-level tool. The best known is Raw Accel, which is free and open source.
Before you install anything like this, check the rules of the platform you play on. Tournament organisers and third-party matchmaking services set their own rules about input software, and those rules change. Ask their support if you are unsure.
How to try it safely
- Write down your current settings first. DPI, sensitivity, and your cm/360 from the sensitivity tool. This is your way back.
- Keep your slow speed where it is. Set the curve so that slow movements match your current sensitivity. Your fine aim stays familiar and only fast movements change.
- Start with a small increase and a cap. Let fast movements reach somewhere around one and a half times your base sensitivity, and cap it there. An uncapped curve is hard to predict.
- Give it two weeks of normal play. The first days will feel wrong whatever you choose.
- Judge it on results. Are you finishing big turns more comfortably, and still hitting the small corrections? If not, go back to the settings you wrote down.
Acceleration fixes one specific problem: wanting a slow sensitivity for aiming and a faster one for turning. If you do not have that problem, you do not need it.
Who should skip it
If you are still settling on a base sensitivity, do that first. See How to choose a sensitivity. Adding a curve on top of a sensitivity you have not settled on gives you two things to tune at once and no way to tell which one is helping.